PTO GEARBOX, FEMALE SHAFT QUICK-FITTING, RATIO 1:3,0 10 KW plus pump group 2, PZ20-WOM series
PTO transmission + hydraulic pump series PZ20-PTO for spreading the arms in the syringe and for leveling the linkage.
Gearbox with PTO
Hollow shaft with snap ring 1" 3/8, z6 DIN9611
at 540 U | |
Achievement: | 10 kW |
Entrance | 540 rpm |
Exit | 1620 rpm |
The gearbox is delivered filled with a high-quality synthetic gear oil.
So you no longer need to buy any transmission oil.
Attached hydraulic pump (gear pump) with the following parameters
Displacement selectable from 8 - 32 cm3/rev
Direction of rotation right
operating pressure from 160 to 200 bar
Angle flange:
Suction side: LK30-1/2"
Print side: LK40-3/4"
The modern compact gearboxes HYLMET are used as PTO pumps as well as for a variety of applications in agriculture, horticulture and municipal services.
Our pumps and gearboxes are not Chinese goods. A product of 100% Polish manufacture.***
Parameters of the gear sets depending on the hydraulic pump:
Advantages of NE Series Pumps
- Designed for continuous operation under high loads.
- Higher efficiency - the volumetric efficiency of the new generation of pumps is about 2-5% higher than that of the "classic"
- Fewer components - the new pump design reduces the number of parts. This is possible thanks to the introduction of a technology with much higher manufacturing accuracy both in housings and covers and, above all, in gears (Class VI gearing). As a result, the pumps achieve a longer service life with lower weight.
- Smaller pump dimensions - the new generation pumps are about 15% shorter in the direction of the wheel axle. At the same time, they retain the same performance as the " classic " construction.
Gearbox comparison: